Skip to content

ADAM Audio H200 review

Berlin-designed closed backs with 40 mm (1.57 in) PEEK drivers, a stated 2 Hz – 23.5 kHz response and 112.5 dB SPL, plus a Headphone Utility plug-in with crossfeed for the DAW.

What it amounts to The mixing-minded pair in this group, and the only one that arrives with software written for itself.

ADAM Audio is better known for monitors, and the H200 reads like headphones designed by a company that thinks in terms of monitoring rather than listening.

The specification is published in full: 40 mm (1.57 in) PEEK drivers, 2 Hz to 23.5 kHz, 112.5 dB SPL. What is more unusual is the Headphone Utility plug-in, which ADAM developed for this model and which includes crossfeed — a way of making a headphone stereo image behave a little more like two speakers in a room, so that long mixing sessions are less fatiguing and pan decisions travel better.

The physical details are the kind that only matter after a month. The three-meter cable can be plugged into either earcup, which decides how it hangs on a desk. Both the 3.5 mm (0.14 in) plug and the 6.35 mm (0.25 in) adapter are in the box, so the pair is usable on a laptop and on an interface without a trip to a shop. Memory-foam pads and an aluminum yoke handle the rest.

ADAM does not publish an impedance figure in this listing, and this page does not invent one.

In its favor, and its limits

Strengths

  • The cable can be attached on either earcup, which is rarer and more useful than it sounds
  • Ships with both the 3.5 mm (0.14 in) connector and the 6.35 mm (0.25 in) adapter an interface needs
  • Memory-foam pads and an aluminum yoke rather than a plastic slider
  • A crossfeed plug-in designed for this specific model, included rather than sold

Compromises

  • The crossfeed tool only helps inside a DAW that can host the plug-in
  • ADAM does not state impedance in this listing, so it is not reported here

Specifications

DesignClosed back, over-ear
Drivers40 mm (1.57 in) PEEK with neodymium magnets
Frequency response2 Hz – 23.5 kHz (ADAM states)
Sound pressure112.5 dB SPL (ADAM states)
Cable3 m (10 ft), attaches on either side, 3.5 mm (0.14 in) with 6.35 mm (0.25 in) adapter
SoftwareHeadphone Utility DAW plug-in with crossfeed
Amazon referenceB0D9QFPX31 (identical on 6 markets)
EAN4260113135235

The two closest instruments on price

Same section, nearest price — what the same money else sounds like.

The questions players ask

What is crossfeed for?

Headphones send each channel to one ear only, which never happens with speakers in a room. Crossfeed bleeds a little of each channel into the other to imitate that. ADAM supplies a plug-in built for this model to do it.

Which cable end goes into an interface?

The supplied cable terminates in 3.5 mm with a 6.35 mm (0.25 in) adapter included, so it fits both a laptop and the larger socket on an interface — the adapter is the part people discover missing at the wrong moment.

Our score

7.8/ 10

The mixing-minded pair in this group, and the only one that arrives with software written for itself.

This one’s price among music instruments and gear

A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom, United States. Listed is not the same as in stock — availability changes daily.

Details checked on August 18, 2026.

Who should pick this one, among music instruments and gear

Mixing on headphones, where crossfeed makes a stereo image less exhausting.

What buyers actually choose

Amazon reports what buyers took in the month before this page was last checked: at least 50.

The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.

Sources

Specifications: the manufacturer sheet for musical instruments and gear and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.

The method applied to these music instruments and gear

Prices quoted in these summaries are dated readings. The live price is shown next to each product.